Email Us
020 3011 2620
020 3011 2620
Email Us

N/SVQ Level 3 Diploma

TRAINING & ASSESMENT

Call: 020 3011 2620
Email Us

TAKE THE NEXT STEP IN YOUR CAREER

No Classrooms or Workshops. Achieve Your NVQ While You Work.

DIPLOMA IN OCCUPATIONAL WORK SUPERVISION

NVQ LEVEL 3

Apply Now
NVQ Level 3 Diploma in Occupational Work Supervision in Construction is the official vocational qualification suitable for trade supervisors who have experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.
This is a qualification that is specifically intended for existing occupational supervisors working in the construction industry. It is essential to hold ganger experience to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On-Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.
The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation and availability. For NVQ Level 3 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-24 months.

Upon successfully completion of the course, you will be awarded a Level 3 NVQ Diploma in Occupational Work Supervision (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Steel Erecting

NVQ LEVEL 3

Apply Now
NVQ Level 3 Diploma in Steel Erecting (Construction) is the authorised vocational qualification for steel erectors with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops; instead, an experienced assessor will be allocated to you and visit you on your site.
This is a qualification that is specifically intended for experienced and working steel erectors in the construction industry. It is essential to hold previous steel erecting experience to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On-Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 3, the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-24 months.
Upon successfully completion of the course, you will be awarded a Level 3 NVQ Diploma in Steel Erecting (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Moving Loads

NVQ LEVEL 3

Apply Now
NVQ Level 3 Diploma in Moving Loads in Construction qualification is an industry specific qualification for those working in this specialised area of construction. Gaining this qualification allows candidates to demonstrate competence in job-related skills in a convenient way as you are not required to attend any classes or workshops; instead, an experienced assessor will be allocated to you to visit you on your site.
This is a qualification that is specifically intended for lifting operatives and supervisors. It is essential to hold previous experience to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On-Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 3, the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-24 months.
Upon successfully completion of the course, you will be awarded a Level 3 NVQ Diploma in Moving Loads (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Heating and Ventilating: Ductwork Planning and Installation

NVQ LEVEL 3

Apply Now
SVQ Level 3 Diploma in Heating and Ventilating Ductwork: Planning and Installation is the official vocational qualification suitable for duct workers who have experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.
This is a qualification that is specifically intended for experienced and working duct fitters in the construction industry. It is essential to hold previous ductwork experience to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On-Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For SVQ Level 3 the minimum length of the assessments from the candidate’s registration to the actual achievement of the SVQ is within 3-24 months.
Upon successfully completion of the course, you will be awarded a Level 3 SVQ Diploma in Heating and Ventilating Ductwork: Planning and Installation (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Cladding Occupations

NVQ LEVEL 3

Apply Now

Level 3 NVQ Diploma in Cladding Occupations (Construction) is the authorised vocational qualification for cladders with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for experienced and working cladders in the construction industry. It is essential to hold previous cladding experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 3 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 3-12 months.

Upon successfully completion of the course, you will be awarded a Level 3 NVQ Diploma in Cladding Occupations (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Steel Fixing Occupations

SVQ LEVEL 3

Apply Now

Level 3 NVQ Diploma in Steel Fixing Occupations (Construction) is the authorised vocational qualification for steel fixers with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for experienced and working steel fixers in the construction industry. It is essential to hold previous steel fixing experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 3 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 3-12 months.

Upon successfully completion of the course, you will be awarded a Level 3 NVQ Diploma in Steel Fixing Occupations (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Get in touch

Leave us a message