All our qualifications are globally recognised

N/SVQ Level 2 Diploma

TRAINING & ASSESMENT

TAKE THE NEXT STEP IN YOUR CAREER

No Classrooms, No Workshops. Qualify While Working.

Diploma in Heating and Ventilating Ductwork Installation

SVQ LEVEL 2

Level 2 SVQ Diploma in Heating and Ventilating Ductwork Installation is the authorised vocational qualification for duct fitters with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.
This is a qualification that is specifically intended for experienced and working duct fitters in the construction industry. It is essential to hold previous ductwork experience to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For SVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the SVQ is within 3-12 months.
Upon successfully completion of the course, you will be awarded a Diploma in Level 2 Heating and Ventilating Ductwork Installation. A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Steel Fixing

NVQ LEVEL 2

NVQ Level 2 Diploma in Steelfixing Occupations (Construction) is the authorised vocational qualification for steel fixers with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for existing steel fixers functioning in the construction industry. It is essential to hold previous steel fixing experience to achieve this qualification.

All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification, all candidates will be assessed via OSAT (On-Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential portfolio of evidence.

The period of the course will heavily depend on the candidates’ interest, motivation and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-12 months.

Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in Steelfixing Occupations (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Steel Erecting

NVQ LEVEL 2

NVQ Level 2 Diploma in Steel Erecting (Construction) is the authorised vocational qualification for steel erectors with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops; instead, an experienced assessor will be allocated to you and visit you on your site.
This is a qualification that is specifically intended for experienced and working steel erectors in the construction industry. It is essential to hold previous steel erecting experience to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On-Site Assessment and Training), which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops, or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required in order to gain the qualification successfully. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2, the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-12 months.
Upon successfully completion of the course, you will be awarded a ProQual Level 2 NVQ Diploma in Steel Erecting. A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Industrial Painting & Decorating

NVQ LEVEL 2

NVQ Level 2 Diploma in Decorative Finishing and Painting Occupations- Painter (Construction) is the official vocational qualification suitable for painters and decorators who have experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for existing or previous painters and decorators functioning in the construction industry. It is essential to hold painting decorating experience in order to achieve this qualification.

All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification, all candidates will be assessed via OSAT (On-Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required in order to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The period of the course will heavily depend on the candidates’ interest, motivation and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-12 months.
Upon successfully completion of the course, you will be awarded a Level 2 NVQ Decorative Finishing and Industrial Painting Occupations (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Passive Fire Protection

NVQ LEVEL 2

NVQ Level 2 Diploma in Associated Industrial Services Occupations – Passive Fire Protection (Construction) is the official vocational qualification suitable for Fire Stoppers’ who have experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for existing Fire Stoppers’ functioning in the construction industry. It is essential to hold past fire protection installation experience in order to achieve this qualification.

All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification, all candidates will be assessed via OSAT (On-Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required in order to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The period of the course will heavily depend on the candidates’ interest, motivation and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-12 months.
Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in Associated Industrial Services Occupations – Passive Fire Protection (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Groundworking

NVQ LEVEL 2

NVQ Level 2 Diploma in Construction Operations and Civil Engineering Services (Construction) is the authorised vocational qualification for groundworkers with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops; instead, an experienced assessor will be allocated to you and visit you on your site.
This is a qualification that is specifically intended for experienced and working groundworkers in the construction industry. It is essential to hold previous ground working experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On-Site Assessment and Training), which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops, or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to gain the qualification successfully. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2, the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-12 months.
Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services- Construction Operations (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Dry Lining Fixing

NVQ LEVEL 2

NVQ Level 2 Diploma in Interior systems – Dry Lining Fixing (Construction) is the authorised vocational qualification for dry liner fixers with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops; instead, an experienced assessor will be allocated to you and visit you on your site.
This is a qualification that is specifically intended for experienced and working dry liners in the construction industry. It is essential to hold previous dry lining fixing experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On-Site Assessment and Training), which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops, or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required in order to gain the qualification successfully. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2, the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-12 months.
Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in Interior Systems- Dry Lining Fixing (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Site Carpentry

NVQ LEVEL 2

NVQ Level 2 Diploma in Wood Occupations- Site Carpentry (Construction) is the authorised vocational qualification for carpenters with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops; instead, an experienced assessor will be allocated to you and visit you on your site.
This is a qualification that is specifically intended for experienced and working carpenters in the construction industry. It is essential to hold previous carpentry experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On-Site Assessment and Training), which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops, or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required in order to gain the qualification successfully. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2, the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-12 months.
Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in in Wood Occupations – Site Carpentry (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Formwork

NVQ LEVEL 2

NVQ Level 2 Diploma in Formwork (Construction) is the authorised vocational qualification for form workers with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops; instead, an experienced assessor will be allocated to you and visit you on your site.
This is a qualification that is specifically intended for experienced and working form workers in the construction industry. It is essential to hold previous formwork experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On-Site Assessment and Training), which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops, or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required in order to gain the qualification successfully. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2, the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-12 months.
Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in in Formwork (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Waterproof Membrane Roofing Systems

NVQ LEVEL 2

NVQ Level 2 Diploma in Waterproof Membrane Roofing Systems (Construction) is the authorised vocational qualification for roofers with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops; instead, an experienced assessor will be allocated to you and visit you on your site.
This is a qualification that is specifically intended for experienced and working roofers in the construction industry. It is essential to hold previous roofing experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On-Site Assessment and Training), which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops, or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required in order to gain the qualification successfully. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2, the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 1-12 months.
Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in Waterproof Membrane Roofing Systems (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Cladding Occupations

NVQ LEVEL 2

Level 2 NVQ Diploma in Cladding Occupations (Construction) is the authorised vocational qualification for cladders with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for experienced and working cladders in the construction industry. It is essential to hold previous cladding experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 3-12 months.

Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in Cladding Occupations (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Certificate in Wall and Floor Tiling

NVQ LEVEL 2

Level 2 NVQ Certificate in Wall and Floor Tiling (Construction) is the authorised vocational qualification for tilers with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for experienced and working tilers in the construction industry. It is essential to hold previous tiling experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 3-12 months.

Upon successfully completion of the course, you will be awarded a Level 2 NVQ Certificate in Wall and Floor Tiling (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Certificate in Interior Systems (Dry Lining Finishing)

NVQ LEVEL 2

Level 2 NVQ Certificate in Interior Systems (Construction) is the authorised vocational qualification for dry liners with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for experienced and working dry liners in the construction industry. It is essential to hold previous drylining experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 3-12 months.

Upon successfully completion of the course, you will be awarded a Level 2 NVQ Certificate in Interior Systems (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Certificate in Plant Operations (digger dumper roller, traffic marshal)

NVQ LEVEL 2

Level 2 NVQ Certificate in Plant Operations (Construction) is the authorised vocational qualification for plant operators with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for experienced and working plant operators in the construction industry. It is essential to hold previous plant experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 3-12 months.

Upon successfully completion of the course, you will be awarded a Level 2 NVQ Certificate in Plant Operations (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Controlling Lifting Operations - Slinger/Signaller

NVQ LEVEL 2

Level 2 NVQ Diploma in Controlling Lifting Operations – Slinger/Signaller (Construction) is the authorised vocational qualification for slinger/signallers with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for experienced and working slinger/signallers in the construction industry. It is essential to hold previous slinging/signalling experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 3-12 months.

Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in Controlling Lifting Operations – Slinger/Signaller (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card

Diploma in Plant Operations (Excavator 360 degree above/below 10 tonnes tracked/wheeled)

NVQ LEVEL 2

Level 2 NVQ Diploma in Plant Operations (Construction) is the authorised vocational qualification for plant operator with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for experienced and working plant operator in the construction industry. It is essential to hold previous plant experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 3-12 months.

Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in Plant Operations (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Specialist Concrete Occupations

NVQ LEVEL 2

Level 2 NVQ Diploma in Specialist Concrete Occupations (Construction) is the authorised vocational qualification for concrete specialists with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This is a qualification that is specifically intended for experienced and working concrete specialists in the construction industry. It is essential to hold previous specialist concrete experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 3-12 months.

Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in Specialist Concrete Occupations (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.

Diploma in Trowel Occupations (bricklaying)

NVQ LEVEL 2

Level 2 NVQ Diploma in Trowel Occupations (Construction) is the authorised vocational qualification for bricklayers with experience in the construction industry. Gaining this qualification will provide you with the opportunity to demonstrate your skills, knowledge, and competence in a convenient way as you are not required to attend any classes or workshops instead an experienced assessor will be allocated to you and visit you on your site.

This qualification is specifically intended for experienced and working bricklayers in the construction industry. It is essential to hold previous bricklaying experience in order to achieve this qualification. All candidates will need to complete an initial assessment before enrolment in which they must demonstrate the ability to meet the requirements of the qualification.

In order to achieve this qualification all candidates will be assessed via OSAT (On Site Assessment and Training) which will take place at our learners’ workplaces. This is an advantage as candidates will not be required to attend any classes, workshops or take time off work. The number of site visits made by the assessor will depend on the experience, interest, and availability of the candidates.

The candidates will be allocated an expert assessor who will support them during the course and carry out all the necessary assessment procedures required to successfully gain the qualification. The complete process will consist of a range of communication methods and evidence collection processes tailored around the individual learner needs. Our assessors will support candidates in the process of gathering all the required evidence to assemble the essential Portfolio of evidence.

The duration of the course will heavily depend on the candidates’ interest, motivation, and availability. For NVQ Level 2 the minimum length of the assessments from the candidate’s registration to the actual achievement of the NVQ is within 3-12 months.

Upon successfully completion of the course, you will be awarded a Level 2 NVQ Diploma in Trowel Occupations (Construction). A valid CITB Health and Safety Test, achieved within the last two years, is required to obtain your CSCS Card.